Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Optimization and improvement measures of the sidewall conveyor belt on sales
2023-04-18
In order to improve the load-bearing capacity of the sidewall conveyor belt on sales, the belt body of the conveyor belt has the smallest lateral bending deformation after loading, that is, to improve the lateral rigidity of the belt body of the sidewall conveyor belt on sales is to reduce the lateral load-bearing deformation of the belt body and increase the load-bearing capacity of the belt body The key to ability.
The lateral rigidity value of the sidewall conveyor belt on sales belt refers to the bending weight of the belt caused by the self-weight of the sidewall conveyor belt due to the belt's own weight in the horizontal vertical section of the belt, which is freely supported on both sides of the belt. The ratio of width magnitudes.
The technical standard for lateral rigidity of sidewall conveyor belts on sales with high lateral rigidity requires no more than 0.05. After optimizing and improving the belt body structure of the sidewall conveyor belt, the lateral rigidity detection value is 0.036 after adding a lateral rigid reinforcement layer. The rear lateral deformation is reduced, which can increase the bearing capacity by 15% to 20%.
An effective measure to improve the lateral rigidity of a large heavy-duty sidewall conveyor belt on sales is to set a special composite adhesive layer for polyester staple fibers after special mixing and calendering between the multi-layer tensile canvas layers of the flat base belt, that is, polyester staple fiber. The fibers are arranged in the glue layer along a single transverse direction of the belt body to lay the embedded glue layer.
The use of this kind of special composite adhesive layer that can enhance the lateral bending resistance of the sidewall conveyor belt on sales can increase the lateral rigidity of the belt by 2.5 times compared with the sidewall conveyor belt of ordinary structure, even if its lateral rigidity is changed by 0.09 improved to 0.036.
Through the above introduction and analysis of the optimization and improvement measures of the sidewall conveyor belt on sales, hope it helps you.
sidewall conveyor belt on sales
RELEVANT INFORMATION
7 installation tips for conveyor belts for coal mines
2022-07-01
524
Wire rope conveyor belt electric peeling machine
2022-07-01
24
What are the advantages of using flame retardant conveyor belts?
2022-07-01
75