Scope of application.
Separation between cover rubber and canvas, cover rubber and steel cord, canvas of various fabric core and steel cord core conveyor belts.
Technical parameters.
1、Electromechanical power: 0.75KW
2、Line speed: 0.3m / s
3、Maximum peeling width: 200mm (NN, EP conveyor belt and steel cord conveyor belt) 400mm (ordinary belt)
Features
1, large peeling area, fast speed, can significantly reduce labor intensity, reduce the time required for the section head.
2、Light weight, easy to carry and transport.
3、Stable operation.
Precautions for use.
1, the power supply should be operated by professional electricians.
2, the use of head stripping machine should be fixed to prevent sliding.
3、Do not exceed the relevant requirements when stripping the width.
Use method.
1, according to the conventional method to set the conveyor belt in line, should be the corresponding joints with a knife to separate, separate the first layer.
2、Place the conveyor belt stripping machine in an appropriate position and fix it with steel wire rope.
3、Turn on the power.
4、Clamp the separated first layer with a fixture, turn on the motor and use the knife to cut the peeling part in the appropriate place.
5、After the first layer is peeled off, repeat the above relevant steps to peel off the second layer, third layer, etc., respectively.